Colido 3D DIY Slic3r Settings: Everything You Need to Know in One Place

G-code commands and M-codes are instructions that tell a machine tool what to do and how to do it. The difference between G-codes and M-codes is that G-codes tell the machine tool what to do (move, cut, etc.), while M-codes tell the machine tool how to do it (speed, coolant, etc.). In other words, G-codes are the commands, and M-codes are the settings.

Colido 3D DIY Slic3r Settings

DOWNLOAD

Next if you still can't connect to the printer, try changing the 'baud rate' (also in the printer software settings)... keep changing this and trying to connect to your printer until you find one that works.

• WOOD print settings (Cura profile import, how it is done ...) Download Cura profile for our WOOD filament. Here the matching 1.75mm WOOD filaments. Here the matching 2.85mm WOOD filaments. Data sheet for our WOOD filament. WOOD material summaryThe base of our wood filament consists of PLA, to which about 30% recycled wood has been added.PLA (Polylactic Acid) belongs to the group of synthetic polymers and is produced from regenerative sources such as corn starch or sugar cane.Thus, PLA is a so-called "biocompatible plastic". Due to the growing environmental awareness of the population and the economy, PLA is becoming increasingly important.The filament is characterised by its high strength, low melting temperature and virtually no warpage.PLA is therefore particularly suitable for beginners. WOOD advantages aesthetic, high-quality wood look

• easy to print

• hardly any warpage

• Heating bed not absolutely necessary

• well suited for larger 3D prints

• no harmful odours during extrusion

• WOOD disadvantages low flexibility

• moderate temperature and weather resistance

WOOD print area (recommendations) Print temperature: 190Cto240CPrint bed temperature:**60Cto85CPrint speed:40mm/sto80mm/sTravel speed:40mm/sto100mm/sSince each 3D printer has its own parameter preferences, adjustments to the settings and fine-tuning are necessary to achieve optimal print results.** depending on the printing bed adhesion method also slightly less (e.g. with BlueTape possibly 10 to 30C less) Spool dimensions Z3D 3D-Drucker-Filament.de1kg (net)0,5kg (net) Outer Ø:200mm200mmInne hole:53mm53mmThickness:65mm38mm eSun1kg (net)0,5kg (net) Outer Ø:200mm200mmInner hole:52mm52mmThickness:70mm42mm General information about our filaments

MatterControl features three slicing engines (MatterSlice, CuraEngine, and Slic3r), making it easy to experiment and compare the results. In basic mode, you can adjust layer height, fill density, support material, and raft. The settings can be saved and applied to successive prints. The advanced features niceties like auto mesh repair and support for multiple extruders. In order to foresee possible hiccups of your print, you can preview the entire process layer by layer.

2ff7e9595c